The bumper car ride is suitable for both adults and children. You can compete with three or two good friends in the game. The following will explain how to maintain your bumper cars to extend the service life from the aspects of site selection, flooring and bumper car maintenance.
Dinis ground electric bumper car
Choose the right bumper car venue:
For electric bumper cars, the floor laying of the venue is very important. A suitable venue will not only increase the fun of the game, but also extend the service life of the bumper cars.
There are venue selection requirements:
The venue should be flat and smooth, such as flat cement floor, tile floor, marble floor, etc. On the one hand, rough ground can cause excessive wear on the wheels. In particular, the frequency of replacement of the driving wheels will increase accordingly. On the other hand, cracks or gaps in the ground will cause poor riding comfort, failure or damage to electronic components, as well as the frame and motor output shaft.
There should be no ditches or pools around the site. When there are ditches and pools, you should take comprehensive protective measures to avoid damage to vehicles and dangerous accidents.
The venue is best level. If there is a slope, it cannot exceed 10 degrees. If the slope is too high, the speed of the bumper car will be too slow when going uphill and too fast and difficult to control when going downhill.
There should be no sharp metal parts or edges on or around the business site to prevent damage to the car body and anti-collision strips caused by sharp objects.
The size of the business site is not the bigger the better. Because if the venue is too large, the fun of the game will be less. The maximum usable area of each bumper car shall not exceed 10 square meters. And the minimum area shall not be less than 5 square meters. The site should be demarcated by dedicated inflatable fences or guardrails to prevent pedestrians from breaking in and being injured by collisions with vehicles, thereby avoiding economic losses.
Maintenance of electric bumper cars floor to extend the service life:
- Mop the ground with a semi-wet mop every day before the bumper car park opens and after it closes in the evening.
- Check the top screws on the floor circuits around the bumper car every day. And tighten them in time if they are loose.
- Check once a day whether the screws around the bottom plate of the bumper car are all tightened.
- Check the starting screws of each floor. If the 2nd, 4th, 6th, 7th and 8th screws are loose, tighten them in time, once a day.
Maintenance of electric bumper car to extend the service life:
- It is best to check the insulating rubber sleeve of the bumper car safety wheel once a day. When the insulating rubber sleeve is damaged, you should replace it in time.
- Check whether the screws of the bumper car’s conductive wheel are loose and whether the rubber cover of the electric wheel screw is damaged. If damaged, please replace it in time.
- The brake screws of the bumper car cannot be too tight or too loose. The standard is that when the bumper car starts, it is best to hold the pedal for 2 to 3 seconds.
- Add lubricating oil to the small conductive wheel of the bumper car once a month.
All in all, these are just some tips about how to maintain your bumper cars to extend the service life. Dinis provides you with high-quality after-sales service. If you want to buy a bumper car, please inquire us.
