The maintenance of electric sightseeing trains is important during the use. Dinis is a professional sightseeing train manufacturer. The following introduces the different battery types of sightseeing trains, precautions for electric sightseeing trains maintenance and its use.
electric sightseeing train
What types of batteries are used in electric sightseeing trains?
The power supply of battery sightseeing trains in our company has two types: the lithium battery and maintenance-free battery.
The improvement in maintenance-free battery technology is the use of AGM separators and special alloy materials to achieve gas circulation inside the battery. This ensures that the battery does not require maintenance during use.
Lithium batteries are a type of battery that uses lithium metal or lithium alloy as the negative electrode material and uses a non-aqueous electrolyte solution. With the characteristics of long life, low self-discharge, light weight, and green and environmentally friendly, lithium batteries have become the choice of many electric sightseeing train manufacturers.
How to maintain the battery sightseeing train
Routine battery maintenance can extend its service life. Here is the information about the maintenance and charge of the battery.
Battery maintenance for sightseeing trains:
- The battery surface, connecting wires and bolts should be clean and dry for a long time.
- Keep the battery pack away from dangerous sources such as heat sources, open flames, flammable and explosive gases (liquids), etc.
- Do not place any debris on the battery.
- Avoid exposing the battery pack to rain, flushing, water, or other corrosive liquids.
The charge of the battery:
After discharging the battery (regardless of the vehicle driving time and mileage), you must charge it on the same day. Charging every other day or charging for more than 24 hours is not allowed, otherwise the battery life will decrease. If you don’t use the train ride for several months, the battery should be stored fully charged and charged every 15 days.
You should maintain key parts at least once a week, such as lubricating mechanical contact parts to avoid long-term dry friction of metal. In addition, the driver should check the tire pressure before starting every day, and check the joints of general lines to see if they firmly connect.
Things you should pay attention to while driving
Drivers must practice how to drive the train in each scenic spot. And they should drive electric tourist trains in accordance with driving regulations.
When starting, the driver should avoid rapid acceleration of the vehicle. Rapid acceleration and starting will cause a large current in the high-voltage circuit. Frequent acceleration and starting will reduce the service life of the motor controller and power battery.
When road and traffic conditions permit, the vehicle should maintain a stable driving speed. After the vehicle accelerates to the corresponding speed, the driver can relax the accelerator pedal appropriately and maintain the current speed.
Dinis not only produces high-quality electric sightseeing trains, but also provide thoughtful after-sales service. These precautions for electric sightseeing trains maintenance and its use will help you run the electric train ride better. If you interest the sightseeing train business, please contact us to purchase.
